A toilet tank that leaks is never a straightforward issue to tackle. When water leaks into the bowl or onto the floor, some plumbing work will be required to correct the issue. It’s good news that once you know the root to the problem, it’s a simple process to fix your bathroom tank that is leaking. You can do this by replacing the flush valve, replacing the leaky fill valve or simply tightening the gaskets in the toilet.
There are 3 common causes that can cause a toilet to leak and every household is susceptible to leaks that happen occasionally.
The most important thing to fix the leak in your toilet is to determine the cause of the water’s go away.
There are signs that your toilet may be suffering from an issue
- Water is on the floor
- The toilet cistern is always filled
- A water run line will develop starting from beneath the rim of the bowl until the water seal at the bottom of the pan.
What’s causing these toilet leaks?
1. Water on the floor
If you see an area of water that is wet, it may not be that somebody has misjudged. It could be the result of an unreliable seal.
The two seals to check are the flush pipe rubber that connects the cistern and your toilet. The seal can degrade due to wear and wear and tear. If it becomes loose, it could allow water to pass through the seal to run onto the floor when the toilet flushes.
The pan connector is also a rubber seal which is used to connect the bathroom bowl with the sewer. In the event that it becomes loose, water can seep from the rubber seal on the connector, and overflow onto the floor.
The most effective way to fix it is to swap both fittings, but if that’s not possible there is a hacker’s solution to it is to use the use of sanitary silicone. It won’t turn moldy if it gets wet. It’s only a temporary fix though.
2. Toilet cisterns fill up continuously
Toilet cisterns that continually fills up when no one has used it requires a new valve for water intake. This is a fix that a majority of plumbers are adept at fixing. A universal water intake valve can be retro fitted to most Cisterns. However, in the event that you have an inducting cistern it is necessary for the valve to be installed. If you want to get your toilet plumbing fixed or maintained, Drain Pro is without any doubt the best company in Sharjah to do it for you. Their experts at Drain Pro have specialized in the art, making sure to perform the Best Toilet Plumbing Services in Sharjah till you are satisfied with the job.
3. Toilet bowls are flooded with water.
A puddle of water forming inside the toilet bowl is an indication that the washer made of rubber that seals the cistern been damaged or shattered. It is easily replaced. However, after testing and finding that water continues to flow into the bowl it may be an indication that the internals of the toilet’s cistern will need to be replaced as well. By the time you factor in the cost of replacement parts and labour, often an upgrade to the toilet suite is the best solution.
Who do you contact for leaky toilets
An Experienced Local Plumbing Company in Sharjah will be the most reliable source for repairs or replacements to an unclean toilet.
Often their quick assessment and installation knowledge will save time and money in the search for parts by yourself. It is also difficult to replace parts within toilet cisterns.
Toilets can cause water bill to rise if leaks aren’t addressed quickly. It’s a good idea to inspect the toilet each time you clean it and to be aware of leaks in the water immediately.
Shutting off the water in the cistern could help prevent water go down the drain when waiting for the plumber to arrive. It is best to turn it on when the toilet has to be used.
The flex hose that connects the cistern to the toilet stop tap must be examined regularly for wear and tear. If you notice any rust or un-fraying of the hose’s material the hose must be replaced as quickly as possible.