There are several reasons to know how to get your key stuck in a lock.
Perhaps you’ve lost the key and the lock is a good entrance place for burglars. Maybe you’re the owner of a building and just removed a tenant and need to keep the door closed until you can change your lock.
Sometimes the wrong person ends up with a key, and you’re liable for the consequences until you’re able to modify the lock. You can deactivate or remove it so that it makes it permanent locked instead of being unlocked. So how do you do this?
There are several ways to destroy locks if you’re desperate. Be aware that you’ll need to have the lock replaced if you ever want to utilize it again. You should only disable the lock only if you’re prepared to do so or you’re planning to not use it again. At Oklahoma City Locksmith Order you can find the best High Security Door Lock Repair Services, which are quick and professional. Oklahoma City Locksmith Order is available any time of the day to fix broken security locks for you.
Be aware that a properly functioning door is essential for fire safety, so be sure that the door isn’t leading to a room that is likely to have people in it before you can have your locks repaired.
Here’s how to get keys stuck in locks or become disabled:
- Products
- Jam The Lock
- Liquids
- Mess With The Lock
- Mess With The Door
Products
There are tools that will block a lock either temporarily or permanently. If you’re interested in knowing how to get a key stuck in a lock then these are the ideal options to go about it. These products let anyone determine how to make a key stick in a lock with ease.
1. Key for Lockout
The most common is probably one that is a lockout key. They are basically key blanks that were divided horizontally in the middle. The key is inserted into the hole and pull out the top half. The bottom half is caught inside the locking. To remove the bottom half put the top half in and then pull the two pieces apart at the same time.
This product is the most common way people know how to get an unlocked key into a lock. However, the issue is that anything you put in the top part of the lock can get the bottom half out. It’s possible to use a paperclip or bobby pin. Of course, most people are unaware of that, and anyone you’re keeping ignorant of this, however it’s worth keeping in your mind.
2. Keyhole Lock
Keyhole locks can be purchased online or at home supply stores. They block the keyway and require a second key to unlock them and take them off. This method won’t work against a determined lockpicker However, it’s a way to stop someone who has the key from using it.
3. Kill Key
Finally, you can get you can also get a “kill key.” These are keys that you deliberately cut off in the lock. They’re designed to be difficult to remove with a broken key extractor, and the only way to get them out is to dismantle the lock. However, with a bit of skill, they are easy to remove.
Blocking The Lock
Sticking almost anything in the lock will cause it to jam in a way that’s generally only reversible if you remove the lock. If you’re having the lock replaced regardless, you can easily clog it with anything that fits. If you are facing difficulties, you can hire Oklahoma City Locksmith Order who offers Professional And Affordable Servicesto clients in Oklahoma City who require Change Door Lock Oklahoma City. You don’t necessarily need to be aware of how to remove a keys stuck in locks. Here are some possible solutions from a variety of.
1. Toothpicks
Toothpicks are good because they are able to be put into the lock and break the lock. Based on the size you want to test it out with one toothpick or an entire bunch of them. Once inside, you can take them apart on the outsideto make them more difficult to get rid of.
If you don’t want your toothpick to be potentially extractable then you could take a small portion of a toothpick before using a different toothpick and pushing it far into the back of the lock. By doing this, you can stop keys from fitting and the user might not know the reason.
2. Paper
Paper is another item that can be inserted into the lock easily, but without being very extractable. You can cut off tiny strips or fold up an entire piece of paper. Use either the key or something thin and small like a toothpick paper clip, or bobby pin to fully insert strips into the lock’s back and jam it up.
3. Cut Off The Key
If you have a copy the real key, you can also cut the tip off. Then, the top is likely to get stuck inside. It could take some time however, and there are better methods above. Doing this is useful for those looking to find out how to make the key out of a lock, however.
Liquids
There are sprays that you can apply to your keyhole to make it jam indefinitely without having to figure out how to get a key stuck in locks. Like all things else, you’ll need the replacement of your lock after having used some of the.
1. Caulk
A common one is caulk that fills holes. After you’ve filled your keyhole with caulk, it’s likely that you’ll want scrape any remaining caulk off using a putty knife to ensure it doesn’t begin dripping all over the place. You can follow the same caulk procedure here – it’s no different when caulking a hole.
2. Spray Foam
Another product that can be used to fill keyholes is spray foam. It’s exactly what it sounds like spray foam into the open keyhole, and you will never put a key in it for the rest of your life. It’s as simple as that. If you add a key you’ve got yourself a powerful method to try out for those who want to learn what to do to prevent a key from getting stuck inside the lock.
3. Glue
This is a great option as you can approach it in various ways. You can utilize hot glue guns to fill your keyhole or be more subtile. You can paint a clip with glue and apply it over the inside of the lock to the top. By doing this, you will be able to glue all of the pins in position and make sure that the key will not be used.
You can also glue the key inside. This is probably the way you imagined when you wondered how to get a lock key stuck inside the lock.
You can use any glue, although powerful ones are recommended. Gorilla glue or Super Glue will do the trick when you don’t have a Hot glue gun.
Messing With The Lock
There are ways to damage or damage the locking mechanism included in the lock or key to stop any unlocking. In some cases, you’ll need to be in a position to remove it and then access the more advanced locking mechanisms. However, not all locks require that level of expertise, however. Here are some easy ways to break the lock.
1. Recut Key
If you’re able to access all the keys and are concerned that the person you’re trying to stop may take one You can cut the key to stop the lock from functioning. It’s all you need is a larger groove in the existing cuts in order to prevent it from interacting with the pins properly. This cut doesn’t need be very deep, it’s just an obvious upward slope.
You don’t need to know how to make a key get stuck inside a lock when you’re able to damage the key.
2. Tape The Knob
Stopping the door from opening could be as easy as tape-down or gluing the knob’s inner ring to unlock the door. If this knob doesn’t work it, then the key will not be able to turn so anyone who tries to unlock the door will be stuck.
When you’re using tape ensure you buy a good duct tape, and tape the entire knob over to ensure no movement can occur. It is probably better to use a good glue for this, as well as glue around the knob to stop it from turning. The best solution would be to try both at once.
As you can see, glue can be an excellent tool for many things. For instance, If you’re looking to learn how to make a key stuck in a lock to stop the locking mechanism turning or block the lock, put on some glue.
3. Cut The Spindle
A specific part of the inside of the lock lets the door work. When you detach the handle, you should discover a hollow spindle which connects with the lever. If you remove or cut the spindle, the handle will not be in a position to communicate with the locking mechanism, thus preventing it from functioning properly.
To cut this piece of metal it requires an iron cutter. If you are planning to remove it without cutting your fingers, you’ll need to dismantle the majority of the lock to put it back to its original form. To accomplish this properly, you have to be aware of the different parts of a lock and how to connect them.
Adjust The Door
If you’re not keen to open the locks, there are options to modify the door to block its opening. Many mechanisms allow the door to open and work properly, including the hinges and strike plate. Therefore, all you need to do is block or alter these mechanisms to prevent your door from opening.
1. Rod In Track
It is possible to place a rod or some other blockage in the door track. This will stop it from opening. A rod that is long is the most effective device since the door will push it along the track and become stuck very quickly. There is no need to be aware of how to stop a key from getting stuck in a lock if you might find something else stuck in the way.
2. 2×4 To Jamb
If you’re fixing the door that slides all you have to do is put a 2×4 against the door jamb to keep them from sliding. You can also use any other large or heavy object to stop sliding and get a stuck sliding door. You can block the door easily by blocking the door jamb. Again, you don’t necessarily have to know how to make the lock key stuck in the lock.