Posted on: December 16, 2022 Posted by: itappsoft Comments: 0

If your door’s push button lock is not working It is possible to determine some causes by understanding the details of your lock. After you have said, “My lock button won’t work,” you can know which options to use to solve the issue. Before you get started on troubleshooting be sure to take your time reading.

The most frequent reasons for a push button door lock not working include:

  1. Energy
  2. The Lock
  3. Programming
  4. The Door

Types Of Push Button Locks

The reason for why your push button door lock isn’t working could depend on the model of lock. The way in which a lock is made to function will tell you how it can become dysfunctional. If the button on your door lock is not working, you need to know what can go wrong and how to fix what’s happening.

Electronic Push Button Locks

Modern push-button locks use some form of electric current, whether it’s provided through a battery or is hardwired into the building’s electrical. They have both electrical and mechanical components, both of which can lead to a lock button not working.

While electronic locks are available in many styles, most are equipped with the push button or keypad function. You may find a single door lock button that’s not functioning or maybe a few are non-responsive. This could make it difficult to open the lock or restrict the functionality of the lock.

Mechanical Push Button Lock

Similar in appearance to its electronic counterpart, a mechanical push button lock can have several housings, each with buttons with a number or letter. The major difference is that a fully mechanical lock works without any electrical power.

When you input the correct numerical or alphabetical sequence, pins move like a standard pin tumbler lock. All moving parts create more opportunities for something to be broken. Mechanical complexity leads to harder to determine the reason your door lock with a push button isn’t functioning.

Privacy Push Button Lock

When some people refer to a push button door lock that’s not working properly, they are looking to open a bathroom door. In this scenario the lock isn’t designed for security. Instead, this simple lock is designed for use for doors that are used in the interior to signal the need to be private. At Oklahoma City Locksmith Order you can find the best High Security Door Lock Repair Services, which are quick and professional. Oklahoma City Locksmith Order is available any time of the day to fix broken security locks for you.

An privacy lock can be described as mechanical push button locks however it’s an uncomplicated version that requires its own category. These locks are often extremely cheap, so in the event of a privacy button door lock malfunctioning, it’s usually best to purchase another one.

1. Energy Interruption

The Problem

A push-button door lock not working may be caused by an interruption in energy. This is common for electronic locks but doesn’t impact mechanical locks. If your lock is powered by batteries or is hardwired into a building, the electrical current can fail or be cut off.

Battery failure is probably the most frequent reason for the electronic door lock with a push button not functioning. However, if there isn’t a power interruption that compromises your security, your electronic locks hardwired will not fail. The wires could fray, or the electronics may fail, but this will be taken care of in the section on damage.

The Solution

Start by changing the batteries in the lock. The battery connection port should be located on the interior of the door, and you’re locked out, there must have an additional emergency battery connection port. The emergency port is often hidden behind a dust cover. It is required to be powered by a 9V battery to provide a temporary charge.

Similar to a car key malfunctioning after a battery change but this isn’t likely to resolve the issue. The problem with energy may be caused by something much more serious. If you make sure you connect the right way as well as swapping batteries and the door lock with a push button isn’t working, go to the section on damage to your lock.

2. Lock Damage

The Problem

The push button locks can fail in many ways. Whether it’s a specific lock button not working or the handle is not turning or a door latch stuck or even a broken door lock. Something needs to be fixed or replaced. You need an assessment of what is going wrong.

For electronic locks, it is possible to make use of a voltmeter in order to test for damaged wires or parts. If mechanical problems occur it is possible to have the lock examined for clearly broken, rusted, or broken components. Anything unusual might be responsible for the door lock’s push button not working.

The Solution

Perhaps, the cause of the door lock with a push button not working is isolated to a single component that can be replaced. For instance, a mechanical push button lock could have an issue in one actuators. A wire might be frayed. A component inside could be corroded or rusted.

Locate the part that is causing the issue, switch it out, fix it or clean it as required. If damage to the lock is severe the lock may have to be completely replaced. To learn more about options or assist in determining the issue, consult the home locksmith or Commercial Locksmith Oklahoma City, based on the set-up that the lock is set to.

3. Reprogramming

The Problem

Though it may seem as though your push button door lock isn’t functioning but the lock may be operating perfectly. There’s a possibility that you’re getting the false impression of it not working because the lock has been reset. This cannot happen with privacy locks.

The process of reprogramming could be accidental when an electronic lock is accidentally moved into its reset mode. The mechanical push-button locks can not be accidentally reset, however, if someone else is responsible for regulating access control for a particular building the lock, they could have changed the lock.

The Solution

In the beginning, see whether anyone is using the latest code. If nobody has the code, climb up to the side of the door and remove the lock off. It should be possible to get the door open and take the lock off. After you have removed the lock you are able to change the lock’s code.

There are override and factory reset protocols accessible as soon as the lock is uninstalled. For more specific instructions on how to perform these resets, you will require the lock manual. Reinstall your keypad lock and then check to see whether the push button door lock is not working still.

4. Door Alignment

The Problem

Even when a push button door lock doesn’t work, and it appears to be caused by the lock, the door might be the culprit. Deadbolts and latches could catch upon the plate, and may have problems unlocking or opening. This is usually caused by door misalignment.

In the case of hollow or solid core doors, the base will lift and the hinges can sag, and it can appear that the door lock that you push is not working. In the case of electronic locks that have motorized latch bolts, any mistake could result in enough resistance to make the lock not unlock.

The Solution

The easiest way to fix a door lock with a push button not working due to alignment is to change the strike plate of the door. You can move the plate up, down, back, or forward depending on the need. If you have an adjustable strike plate this will make the process easier.

In addition to the strike plate Also, check on the door hinges. Tighten the set screws and see if that resolves the problem of your door lock’s push button not working. Locksmiths can also install hinges with a mechanism that allows you to lift doors or reduce them without re-drilling.

Final Thoughts

When your push button door lock not working, it could appear as if there is no immediate solution. However, a lock button that is not working could be much easier to fix than what you think. If you’re not able to find the answer in this article, see whether Best Locksmith Oklahoma City services your area.


Leave a Comment